[Windows] windows 7 recognize 不到 第二個HDD

sekyee

我剛剛買了新CPU回來， 然後就拆了以前舊CPU 的HDD 裝進新CPU 裏做 2nd HDD.
不過當我裝了windows 7后, windows 7 recognize 不到 第二個HDD.
請問究竟是什麽一囘事??
請各位幫幫忙 , 我不敢亂按東西因爲怕一小心就洗完 HDD 裏的全部data >.<

gspot

Did you check SATA settings in BIOS?

sekyee

not yet >.< what is it suppose to be in the setting?

cykwok

BIOS 內detectvHDD
同一IDE cable 有2個IDE device (jumper setup "Cable select" + "Cable select" or "Master" + "Slave")
Check BIOS->IDE channel 1 or 2 setup (Enable)
Check IDE HDD cable
SATA HDD, Check SATA cable
如 BIOS 內detectvHDD
Windows 去Disk management 找

johnsin

右click我的電腦--->管理--->磁碟管理  看見第二個HDD嗎?

若看見第二個HDD 請你先初始化，才會在window 看見

pokerplayer999

you need a driver for your old hdd.

lokekokho

可以做一个测试吗？
把旧的HDD拆开出来暂时不要按，看开机正常吗，如开不到WINDOWS了，就是说你已经把旧的HDD重灌了。

you need a driver for your old hdd.
pokerplayer999 發表於 2010-3-15 03:51 PM

yes, and you need a driver for your new HDD also.

kwplee

What interface of your 2nd HDD PATA or SATA?  If it's a PATA (old IDE), check the jumper setting on your HDD is at slave.  Then follow bios menu if it can be detected.  If it's SATA, update your motherboard or bios firmware to see any improvement.  Update the IDE ATA/ATAPI controller driver to latest if possible.

ettachris1991

去cmos set把你现在的HDD set成第一个的first boot的HDD，如果cmos完全detect不到尝试set jumper看看。如果还是一样，可以try lokekokho的方法。

yang5301

><I am facing this problem too LO>..

cck_my

><I am facing this problem too LO>..
yang5301 發表於 2010-8-23 05:32 PM

What is your situation?