[資訊] 三菱引擎讨论区！三菱引擎全资料！（资料库）

jjj9930

这是一个4G引擎讨论区，资料会节节更新！

有不同国家官方资料显示！（日本）（马国）（USA）（加拿大）



Mitsubishi 4G engine


4G91
The4G91 uses a 78.4 mm bore and 77.5 mm stroke for a total displacement of1.5 litres. With a 9.5:1 compression ratio and DOHC,four-valve-per-cylinder head and multi-point EFI, this engine produces84 kW at 6000 rpm and 135 N·m at 5000 rpm.


4G91 1.5 liter NA EngineDOHC 16-valve
Compression Ratio :9.5:1
Bore: 78.4mm
Stroke: 77.5 mm
Maximum Power: 112.65HP at 6000 rpm
Maximum Torque: 135Nm at 5000 rpm

Applications:
Mitsubishi Lancer
Mitsubishi Mirage

数据有不同之处，原因是各国官方资料不同！
4G92
The4G92 displaces 1.6 L (1597 cc) and is available with either SOHC orDOHC or MIVEC DOHC versions. Power output can be as high as 172 hp(128kw), as found in the Mirage Cyborg-ZR. A Modular Displacement (MD)version of the 4G92 MIVEC was also produced – MD is Mitsubishi'scylinder deactivation system which helps improve fuel consumption.

4G92 Mivec 1.6 liter Engine
Capacity: 1597cc
Fuel System: (Mitsubishi) multi-point fuel injection
Valve train: dohc 16v with MIVEC
Compression Ratio: 11:1
Bore: 81.0
Stroke: 77.5
Maximum Output: 172HP at 7500rpm
Maximum Torque: 167Nm at 7000 rpm

4G92P SOHC 16 Valve
Total Displacement - 1597cc
Bore - 81.0mm
Stroke - 77.5mm
Compression Ratio - 10:1
Maximum Output - 70kW @ 5,500rpm
Maximum Torque - 135N·m @ 4,000rpm

Applications:
Mitsubishi Lancer
Mitsubishi Mirage
Proton Satria
Proton Wira
Mitsubishi Carisma

4G93Engine Model
The1.8 L (1834 cc) 4G93 is also available in both SOHC and DOHC versions.Turbocharged variants are also produced. The 4G93 was the first moderngasoline direct injection engine on its introduction in August 1996,and Mitsubishi produced over a million GDI engines. The SOHC 4G93provides 86 kW at 6000 rpm and redlines at 6500 rpm. The DOHC4G93/4G93P has 103kw at 6000rpm and redline at 7600rpm

4G93 SOHC 16 Valve
Electronic Controlled Injection (MPI)
Total Displacement: 1834cc
Bore: 81.0mm
Stroke: 89.0mm
Compression Ratio: 9.5:1
Maximum Output: 115HP at 5,500rpm
Maximum Torque: 161Nm at 4,500rpm

4G93 DOHC 16 Valve
Gasoline Direct Injection (GDI)
Total Displacement: 1834cc
Bore: 81.0mm
Stroke: 89.0mm
Compression Ratio: 12:1
Maximum Output: 128HP at 6,000rpm
Maximum Torque: 177Nm at 3,750rpm

4G93T (GSR T)

4G93 GSR 1.8 liter Turbo Engine4G93 DOHC 16 Valve Turbocharged.
Total Displacement: 1834cc
Mitsubishi electronic with port fuel injection (MPFI)
Turbocharger: Mitsubishi IHI TD04L-13G-5
Compression Ratio: 8.5:1
Bore: 81.0mm
Stroke: 89.0mm
Maximum Power: 190HP At 6,000rpm
Maximum Torque: 250Nm At 3,750rpm

Applications:
Mitsubishi Galant
Mitsubishi Legnum
Mitsubishi Aspire
Mitsubishi RVR
Mitsubishi Pajero iO
Mitsubishi Carisma
Mitsubishi Space Star
Mitsubishi Lancer
Mitsubishi Lancer GSR
Mitsubishi Colt
Proton Satria GTi
Proton Putra
Proton Wira
Volvo S40
Volvo V40

4G94

The4G94 is a 2.0 L version built in Japan, used in the Mitsubishi Lancer.Bore is 81.5 mm and stroke is 95.8 mm, with a compression ratio of9:5:1. Output is 120 hp (89 kW) at 5500 rpm with 130 ft·lbf (176 N·m)of torque at 4250 rpm. It has a cast iron engine block with MFI fuelinjection and an aluminum SOHC cylinder head with forged steelconnecting rods and four valves per cylinder.

4G63 Vr4

4G63 VR4 2.0 literTurbo EngineDOHC 16v inline 4 cylinder
Displacement: 1997 cc
Fuel System: ECI-MULTI
Compression Ratio: 7.8:1
Bore: 85mm
Stroke: 88 mm
Maximum power: 240Hp at 6000 rpm
Maximum torque: 304 Nm at 3500 rpm

4G63 Evo

4G63t Evo 2.0 liter Turbo EngineDOHC 16v inline 4 cylinder
Displacement: 1997 cc
Fuel System: ECI-MULTI
Bore: 85mm
Stroke: 88 mm
Maximum Power/Torque from base model
Evo I : 244 hp at 6000rpm and 309Nm at 3000rpm
Evo II : 252 hp at 6000rpm and 309Nm at 3000rpm
Evo III : 270 hp at 6250rpm and 309Nm at 3000rpm
Ev0 IV : 276 hp at 6500rpm and 352Nm at 3000rpm
Evo V : 276 hp at 6500rpm and 373Nm at 3000rpm
Evo VI : 276 hp at 6500rpm and 373Nm at 3000rpm
Evo VII : 276 hp at 6500rpm and 385Nm at 3000rpm
Evo VIII: 276 hp at 6500rpm and 385Nm at 3000rpm
Evo IX:( MIVEC ):286hp at 6500rpm and 392Nm at 3500rpm
6a10 V6 24-Valve

jjj9930

4G61
The4G61 displaces 1595 cc (82.3 x 75.0 mm bore/stroke). This engine wasalways DOHC 16-valve and used either Multi-point (MPFI) or ElectronicControl (ECFI) fuel injection. A turbocharged version was also producedfor the Mirage and Lancer. The 4G61 does not have balance shafts likethe other 4G6x motors. Instead, it has different components, some ofwhich can be used on the "Silent Shaft" engine.
Performance:

4G61 91kW-124HP/6500 142Nm/5000
4G61T (USA/Canada only) 99kW-135HP/6000 191Nm/3000
4G61T (Japan) 160HP-117.68kW/6000 220.65Nm/2500

Mitsubishi Colt

Dodge Colt

Hyundai Elantra

Eagle Summit

Applications:
1988–1992 Mitsubishi Mirage / Mitsubishi Colt (MPFI)
1988–1992 Dodge Colt / Plymouth Colt
1988–1992 Eagle Summit
1992–1995 Hyundai Elantra

4G62
Thelarger 1.8 L 4G62 was an SOHC 8-valve unit for longitudinal rear-wheeldrive and all-wheel drive use. With an 80.6 x 88.0 mm bore / stroke, itdisplaced 1795 cc.

Mitsubishi L300

Mitsubishi Cordia



Mitsubishi Tredia



Applications:
1983–1989 Mitsubishi Cordia
1988 -Mitsubishi Tredia
1984-1986 -Mitsubishi L300 (Australia - Also known as the Mitsubishi Express)

4G63
The4G63 was a 1997 cc version. (85mm Bore x 88 mm Stroke) SOHC and DOHCwere produced. The DOHC version was introduced in 1987 in the Japanesemarket Galant VR-4 and came turbocharged or naturally aspirated. It isfound in various models including the 1988-92 Galant VR-4 and the U.S.market 1990-1999 Eclipse, as well as the Mitsubishi Lancer EvolutionI-IX.

The SOHC version was used in Mitsubishi Galant models until 1993. It has 76 kW of output and 157 NM of torque at 4750 rpm.
Alsothe SOHC version is produced until the late 90s and early 2000 and itis used in Mitsubishi cars like the Montero and the 2.0L 2-door Pajerowith an output of 101kw at 4700 rpm. Also the N33 and N83 Spacewagon(UKmarket) in single cam 16 valve format.

TheMitsubishi Eclipse, Eagle Talon and Plymouth Laser introduced the DOHCturbocharged intercooled version to the U.S. in 1989 through DiamondStar Motors, a joint venture between Mitsubishi Motors and the ChryslerCorporation. From 1990 to late April 1992 came beefier rods and the useof 6 bolts to secure the flywheel to the crankshaft; May 1992 to 2006Evolution versions have lighter rods and use 7 bolts to secure theflywheel to the crankshaft. They are referred to as the "six bolt" and"seven bolt" engines, respectively.

Outputfor the 2003 Japanese/US Mitsubishi Lancer Evolution is 271 hp (202 kW)at 6500 rpm with 273 ft·lbf (370 N·m) of torque at 3500 rpm. It has acast iron engine block and aluminum DOHC cylinder head. It usesmulti-point fuel injection, has 4 valves per cylinder, is turbochargedand intercooled and features forged steel connecting rods.
Inthe United Kingdom, a special Lancer Evolution, the FQ-400, produces302.13 kW (405.2 hp), from a 4G63 engine. At 202.6 hp (151.3 kW) perliter, it has the highest specific output per liter of any productionengine.
(请版主见谅，此资料无中文版本)


Racing
Itsturbocharged variant, 4G63T (also sometimes referred to simply as the4G63), has powered Mitsubishi vehicles in World Rally Championships foryears in the Mitsubishi Galant VR-4, Lancer Evolution, Carisma GT andLancer WRC04. It was the powerplant of the Lancer Evolution when TommiMäkinen won his four sequential WRC championships in his Lancer.
Mitsubishi Chariot

Mitsubishi Galant

Mitsubishi Eclipse

Eagle Talon

Plymouth Laser

Mitsubishi Starion

Hyundai Sonata

Hyundai Grandeur

Proton Perdana

Brilliance BS6


Applications:
1984–1987 Dodge Colt Vista
1988 Mitsubishi Cordia
1988 Mitsubishi Tredia
1988–1992 Dodge Colt Vista
1989–1992 Mitsubishi Galant
1989–1992 US-spec Mitsubishi Galant
1990–1999 Mitsubishi Eclipse
1990–1998 Eagle Talon
1990–1994 Plymouth Laser
1982–1990 Mitsubishi Starion (Australia)
1992–1998 Hyundai Sonata
1986-1998 Hyundai Grandeur
1993-1998 Mitsubishi Montero
1994–1998 Mitsubishi RVR X3 Turbo
1994-1998 Mitsubishi Delica 2WD version (Japan)
1996-1999 Proton Perdana sei
1992-2006 Mitsubishi Lancer Evolution
2001-2006 Mitsubishi Airtrek Turbo
2001-2006 Mitsubishi Outlander Turbo
2004-present Brilliance BS6

jjj9930

4G64
Thelongitudinal 4G64 is the second largest variant, at (2350 cc). Earlymodels were 8-valve SOHC, but a later 16-valve SOHC and DOHC versionwas also produced. All used MPFI with an 86.5 mm bore and 100 mmstroke. The 4G64 was also available with gasoline direct injection. Theversion used in the Chrysler Sebring/Stratus coupes produced 152 hp(110 kW) at 5500 rpm with 162 ft·lbf (214 N·m) of torque at 4000 rpm.The Chrysler version features fracture-split forged powder metalconnecting rods. The 4G64 is an interference motor like the 4G63,however, the early 8-valve 4G64 is a non interference engine.
Applications:
1987–1990 Mitsubishi Sapporo
1988–1990 Mitsubishi Van
1990–1992 Mitsubishi L200
1990–1996 Mitsubishi Mighty Max
1986-1998 Hyundai Grandeur
1993-1997 Mitsubishi Expo
1994–2003 Mitsubishi Galant
1996–1998 Mitsubishi Magna
1994–2006 Mitsubishi Spacegear (2WD Version)
1996–1999 Mitsubishi Eclipse Spyder GS
2000–2005 Mitsubishi Eclipse RS & GS
2003 Mitsubishi Outlander
2005 Mitsubishi Zinger
(车种上面的图片都有显示，省位子不放了)
Others:
1989–1991 Hyundai Sonata
1990–1992 Dodge Ram 50
2001–2005 Chrysler Sebring coupe/Dodge Stratus coupe
2004-present Brilliance BS6
2008-present Chery V5

4G67
The 16-valve DOHC 4G67 displaced 1836 cc. Bore x Stroke [mm]: 81.5 x 88

Applications:
Mitsubishi Mirage
Mitsubishi Galant
Mitsubishi Lancer
Hyundai Elantra

4G69
The4G69 is a 2378 cc version built in Shiga, Japan. Bore is 87 mm andstroke is 100 mm. Output is 162 hp (119 kW) at 5750 rpm (160 in theSportback Wagon) with 162 ft·lbf (219 N·m) of torque at 4000 rpm. Ithas a cast iron engine block and aluminum SOHC cylinder heads. It usesmulti-point fuel injection, has 4 valves per cylinder with rollerfollowers and features forged steel connecting rods, a one-piece castcamshaft, and a cast aluminum intake manifold. The 4G69 incorporatesMitsubishi's MIVEC Variable Valve Timing technology. The 4G69 is aninterference motor like the 4G63 and 4G64.

Applications:
2003–present Mitsubishi Grandis
2004–2006 Mitsubishi Lancer (Ralliart and Sportback Wagon only)
2004–present Mitsubishi Galant
2004–present Mitsubishi Outlander
2006–present Mitsubishi Eclipse
NB: From 2005 a slightly detuned version (115kW, 220Nm) is used across the entire Lancer range in Australia.

jjj9930

PROTON WIRA

1.3GLi
5-speed MT (F5M21)
4G13P SOHC
Multi Point Injection (MPI) Fuel System
Max output : 74 bhp (55 kW; 75 PS) @ 6,000 rpm
Max torque : 108 N·m (80 ft·lbf) @ 4,000 rpm
Max speed : 163 km/h (101 mph)


1.5GLi
5-speed MT (F5M21) / 3-speed AT (F3A21)
4G15P SOHC
Multi Point Injection (MPI) Fuel System
Max output : 89 bhp (66 kW; 90 PS) @ 6,000 rpm
Max torque : 126 N·m (93 ft·lbf) @ 3,000 rpm
Max speed : 174 km/h (108 mph) (manual); 165 km/h (103 mph) (automatic)


1.6GLXi/1.6XLi
5-speed MT (F5M21) / 4-speed AT (F4A22)
4G92P SOHC
Multi Point Injection (MPI) Fuel System
Max output : 111 bhp (83 kW; 113 PS) @ 6,000 rpm
Max torque : 138 N·m (102 ft·lbf) @ 5,000 rpm
Max speed : 193 km/h (120 mph) (manual); 185 km/h (115 mph) (automatic)


1.8EXi
4-speed AT (F4A22)
4G93P DOHC
Multi Point Injection (MPI) Fuel System
Max output : 138 bhp (103 kW; 140 PS) @ 6,000 rpm
Max torque : 164 N·m (121 ft·lbf) @ 5,500 rpm
Max speed : 196 km/h (122 mph)

4G93 SOHC 16 Valve
Electronic Controlled Injection (MPI)
Total Displacement: 1834cc
Bore: 81.0mm
Stroke: 89.0mm
Compression Ratio: 9.5:1
Maximum Output: 115HP at 5,500rpm
Maximum Torque: 161Nm at 4,500rpm



2.0D (diesel)
5-speed MT (F5M21)
4D68 SOHC
Normally-aspirated direct injection, non-common rail
Max output : 67 bhp (50 kW; 68 PS) @ 4,500 rpm
Max torque : 123 N·m (91 ft·lbf) @ 3,000 rpm
Max speed : 160 km/h (99 mph)

jjj9930

Mitsubishi (泰国官方资料)

6G 74 V6 DOHC 24 V. 93x85.8 3496 CC. 280/6000 33/4500 4.376 FF 4 AT ---
6G 74 V6 DOHC 24 V. 93x85.8 3496 CC. 260/6000 33/4500 Debonair
6G 74 MIVEC V6 DOHC 24 V. 93x85.8 3496 CC. 280/6500 33.5/3000 ---
6G 74 GDI 6 DOHC 24 V. 93x85.8 3496 CC. 220/5500 35.5/3750 Pajero 1999
6G 73 GDI V6 DOHC 24 V. 83.5x76 2497 CC. 200/6000 25.5/3500 DIAMANTE
6G 72 T V6 DOHC 24 V. 91.1x76 2972 CC. 280/6000 43.5/2500 4.155 4WD 6 MT GTO Twin Turbo
6G 72 MIVEC V6 DOHC 24 V. 91.1x76 2972 CC. 270/7000 30.7/4500 3.687 FF 4 AT MIVEC
6G 72 GDI V6 DOHC 24 V. 91.1x76 2972 CC. 240/5750 31/3500 3.333 FF 5 AT DIAMANTE
6G 72 V6 DOHC 24 V. 91.1x76 2972 CC. 225/6000 28/4500 4.422 4WD 4 AT GTO SR
6G 72 V6 OHC 24 V. 91.1x76 2972 CC. 200/5500 28/4500 DIAMANTE WAGON
6G 72 V6 OHC 24 V. 91.1x76 2972 CC. 185/5500 27/4500 DELICA
6G 72 V6 OHC 12 V. 91.1x76 2972 CC. 170/5500 25.3/3000 Debonair
6A 12 T V6 DOHC 24 V. 78.4x69 1998 CC. 240/6000 31.5/3500 5.443 4WD 5 MT FTO GPX , GP
6A 12 MIVEC V6 DOHC 24 V. 78.4x69 1998 CC. 200/7500 20.4/6000 4.626 FF 4 AT ELC FTO GPX , GP 1996
6A 12 MIVEC V6 DOHC 24 V. 78.4x69 1998 CC. 200/7500 20.4/6000 3.735 FF 5 AT ELC FTO GPX , GP 1997
6A 12 V6 DOHC 24 V. 78.4x69 1998 CC. 170/7000 19/4000 4.322 FF 5 MT FTO GPX , GP
6A 12 V6 DOHC 24 V. 78.4x69 1998 CC. 170/7000 19/4000 4.350 FF 4 AT FTO GPX , GP
6A 13 T V6 DOHC 24 V. 81x80.8 2498 CC. 280/5500 37/4000 4.111 4WD 5 MT Galant VR4 Type S, Type V 1999,LEGNUM VR-4
4G 64 GDI 4 DOHC16 V. 86.5x100 2350 CC. 165/5500 23.5/5500 Galant 24 Viento 1999,LEGNUM Viento/Custom,RVR
4G 63 T 4 DOHC 16 V. 85x88 1997 CC. 280/6500 36.5/3000 4.529 4WD 5 AT EVO IV GSR หันขวา
4G 63 T 4 DOHC 16 V. 85x88 1997 CC. 280/6500 36.5/3000 4.875 4WD 5 MT EVO IV RS หันขวา
4G 63 T 4 DOHC16 V. 85x88 1997 CC. 270/6500 31.5/3000 4.529 4WD 5 MT 4WD EVO III หันซ้าย
4G 63 T 4 DOHC16 V. 85x88 1997 CC. 260/6500 31.5/3000 4.529 4WD 5 MT EVO II
4G 63 T 4 DOHC16 V. 85x88 1997 CC. 250/6500 30.5/3000 4.529 4WD 5 MT EVO I
4G 63 T 4 DOHC16 V. 85x88 1997 CC. 245/6500 30/3000 4.529 4WD 5 MT GALANT VR4 '91
4G 63 T 4 DOHC16 V. 85x88 1997 CC. 225/6500 30/3000 4.529 4WD 5 MT GALANT VR4 '90
4G 63 T 4 DOHC 16 V. 85x88 1997 CC. 230/5500 35/2500 RVR
4G 63 T 4 DOHC 16 V. 85x88 1997 CC. 185/5500 27/3000 4.420 4WD 4 AT ECLIPSE 1991
4G 63 T 4 DOHC 16 V. 85x88 1997 CC. 220/6000 30.5/3000 4.376 FF 4 AT ELC ECLIPSE 1995
4G63 T 4 DOHC 16 V. 85x88 1997 CC. 205/6000 29/2500 4.529 4WD 5 MT GALANTVR4 '89
4G 63 T 4 DOHC 16 V. 85x88 1997 CC. 280/6500 38/3000 EVO IV ฝากลับ ดำ-แดง
4G 63 T 4 DOHC 16 V. 85x88 1997 CC. 280/6500 39/3500 EVO VII 2001
4G 63 T 4 DOHC 16 V. 85x88 1997 CC. 280/6500 40/3500 EVO VIII 2003 Jp.
4G 63 T 4 DOHC 16 V. 85x88 1997 CC. 275/6500 37.7/3500 EVO VIII 2003 USA.
4G 63 4 DOHC 16 V. 85x88 1997 CC. 145/6000 17.5/5000 4.322 FF 5 MT 1990
4G63 4 DOHC 16 V. 85x88 1997 CC. 148/6500 17.6/5000 4.322 FF 5 MT GalantGTi 1992
4G 63 4 DOHC 16 V. 85x88 1997 CC. 160/6500 19/4750 4.322 FF 5 MT 1995-1996
4G 63 4 DOHC 16 V. 85x88 1997 CC. 160/6500 19/4750 4.350 FF 4 AT 1995-1996
4G 63 4 SOHC 16 V. 85x88 1997 CC. 140/6000 18/4750 4.350 FF 4 AT 1990
4G 63 4 DOHC 16 V. 85x88 1997 CC. 220/6000 30.5/2500 Eclipse 1999
4G 64 GDI 4 DOHC 16 V. 86x100 2350 CC. 165/5500 23.5/3500 LEGNUM
4G 94 GDI 4 DOHC 16 V. 81.5x95.8 1999 CC. 145/5700 195/3750 ASPIRE
4G 93 T 4 DOHC 16 V. 81x89 1834 CC. 215/6000 29/3000 LIBERO GT
4G93 T 4 SOHC 16 V. 85x88 1834 CC. 185/6000 27/3000 4.933 4WD 5 MT 1993หันซ้าย
4G 93 T 4SOHC 16 V. 85x88 1834 CC. 185/6000 27/3000 4.324 4WD 4 AT ELC หันขวา1995
4G 93 T 4DOHC 16 V. 81x89 1834 CC. 205/6000 28/3000 4.933 4WD 5 MT LANCERGSR,MIRAGE VR-X หันขวา 1996
4G93 GDI 4 DOHC 16 V. 81x89 1834 CC. 150/6500 18.2/4000 4.058 FF 5 MT1997 หันขวา
4G 93GDI 4 DOHC 16 V. 81x89 1834 CC. 150/6500 18.2/4000 4.042 FF 4 AT 1997หันขวา
4G 93 GDI4 DOHC 16 V. 81x89 1834 CC. 140/6000 18.5/3750 Galant Vivace,Exceed,Viento,VR-G,ASPRIE,LEGNUM Viento/ST,RVR
4G 93 GDI 4 DOHC 16 V. 81x89 1834 CC. 130/6500 18.25/3500 PAJERO iO
4G93 E 4 DOHC 16 V. 81x89 1834 CC. 145/6500 18/4000 4.058 FF 5 MT 1993หันซ้าย
4G 93 E 4DOHC 16 V. 81x89 1834 CC. 145/6500 18/4000 4.042 FF 4 AT 1993 หันซ้าย
4G 93 4 SOHC 16 V. 81x89 1834 CC. 122/6000 16.4/4500 Lancer'98
4G 93 4 OHC 16 V. 81x89 1834 CC. 120/6000 16.2/4500 LIBERO MONTE
4G92 MIVEC 4 DOHC 16 V. 81x77.5 1597 CC. 175/7500 17/7000 4.625 FF 5 MT1997 หันขวา
4G 92 4 OHC 16 V. 81x77.5 1597 CC. 110/6000 14.5/4500 LIBERO
4G92 E 4 DOHC 16 V. 81x77.5 1597 CC. 175/7500 17/7000 4.592 FF 5 MTMIRAGE ASTI RX หันซ้าย 1993
4G92 E 4 DOHC 16 V. 81x77.5 1597 CC. 145/6000 16.5/5000 4.592 FF 5 MTMIRAGE ASTI RX หันซ้าย 1993
4G91 E 4 DOHC 16 V. 78.4x74.5 1496 CC. 115/6000 13.8/5000 4.062 FF 4 AT1996 หันขวา
4G 15E 4 DOHC 16 V. 75.5x82 1468 CC. 110/6000 14/3000 4.042 FF 4 AT LANCERMX,EXCEED, MIRAGE EXCEED/VIE/MODRAC/ASTI หันขวา 1996
4G 15 E 4 DOHC 16 V. 75.5x82 1468 CC. 110/6000 14/3000 4.042 FF 5 MT LANCER MX,EXCEED, MIRAGE EXCEED/VIE/MODRAC/ASTI หันขวา 1996
4G 15 GDI 4 DOHC 16 V. 75.5x82 1468 CC. 105/6000 14.2/3500 DINCO
4G 15 4 OHC 12 V. 75.5x82 1468 CC. 91/6000 12.4/3000 4.042 FF 4 AT LIBERO 1996
4G 15 4 OHC 12 V. 75.5x82 1468 CC. 91/6000 12.4/3000 4.052 FF 5 MT LIBERO 1996
4G 15 4 OHC 12 V. 75.5x82 1468 CC. 85/6000 12.5/3500 LIBERO
4G 13 4 OHC 12 V. 71x82 1298 CC. 88/6000 11/2000 MIRAGE MODRAC/ASTI
4G 13 4 OHC 12 V. 71x82 1298 CC. 79/6000 18/3500 LIBERO
4G 13 4 SOHC 16 V. 71x82 1298 CC. 77/5500 11/4000 CHAMP II 1989
G 12 B 4 SOHC Turbo 74x82 1410 CC. 105/5500 15.5/3000 ---
G 32 B 4 SOHC Turbo 76.9x86 1597 CC. 120/5500 17.5/3000 Lancer 1985
G 63 B 4 SOHC 12 V. Turbo 85x8 1997 CC. 200/6000 28.5/3500 Galant Sigma 1987
4M 41 DI 4 DOHC 16 V. 98.5x105 3200 CC. 175/3800 39/2000 Pajero 1999
4M 40 T 4 OHC 8 V. 95x100 2835 CC. 140/4000 32/2000 DELICA
4M 40 4 SOHC 8 V. 95x100 2835 CC. 101/4000 198nm/2000 Starda
4D 56 4 SOHC 8 V. 91.1x95 2477 CC. 90/4200 150nm/2500 Starda
4D 56 T 4 SOHC 8 V. 91.1x95 2477 CC. 94/4200 23/2000 Pajero
3G 83 3 OHC 12 V. 65x66 657 CC. 50/6500 6.3/4000 MINICA,TOPPO
3G 83 3 SOHC 12 V. 65x66 657 CC. 48/6000 6.3/6000 TOWN BOX
4A 30 IT 4 DOHC 20 V. 60x58.3 659 CC. 64/7000 10.2/3500 PAJERO MINI,TOWN BX, TOPPO
4A 30 4 OHC 16 V. 60x58.3 659 CC. 60/6000 8.5/4000 TOPPO
4A 30 4 DOHC 16 V. 60x58.3 659 CC. 52/6500 6.3/4500 PAJERO MINI
4A 31 4 OHC 16 V. 66x80 1094 CC. 75/6000 10.2/4000 TOWN BOX
4A 31 4 OHC 16 V. 66x80 1094 CC. 78/6000 10.5/4000 TOPPO
8A80 GDI V8 DOHC 32 V. 86x96.8 4498 CC. 80/5000 42/4000 DIGNITY

jjj9930

4G11
The 4G11 displaces 1.2 L (1244 cc) with a bore and stroke of 69.5 mm x 82.0 mm.

Applications:
Mitsubishi Colt/Mirage
Mitsubishi Lancer

4G12
The4G12 displaces 1.4 L (1410 cc) with a bore and stroke of 74.0 mm x 82.0mm. 4G12 was the first to feature Mitsubishi's MD (ModulatedDisplacement) technology, a form of variable displacement.

Lancer EX
Applications:
Mitsubishi Colt/Mirage
Mitsubishi Lancer EX
Mitsubishi Celeste
Mitsubishi Tredia/Cordia

4G13
The SOHC 4G13 displaces 1.3 L (1298 cc) with a bore and stroke of 71.0 mm x 82.0 mm.

Mitsubishi Space Star

Mitsubishi Carisma
Applications:
Mitsubishi Colt/Mirage
Mitsubishi Lancer
Mitsubishi Space Star
Mitsubishi Carisma
Mitsubishi Dingo
Proton Saga/Iswara
Proton Satria/Wira

4G15
TheSOHC 4G15 displaces 1.5 L (1468 cc) with a bore and stroke of 75.5 mm x82.0mm. A version of the 4G15 was produced with gasoline multi portinjection. It has approximately 92 hp (69 kW) on the 1993 Mirage model.A DOHC MIVEC turbo variant of the engine is also still in production todate (4G15T), serving in the Mitsubishi Colt series, offering 154 hp(115 kW) on the latest Colt Version-R (with exhaust enhancement).


Mitsubishi Dingo

Saga Iswara

Proton Saga First generation

Satria First generation
Applications:
Mitsubishi Colt/Mirage
Mitsubishi Lancer/Eagle Summit
Mitsubishi Dingo
Proton Saga/Iswara
Proton Satria/Wira

4G16
The 4G16 displaces 1.2 L (1198 cc).

Applications:
Mitsubishi Colt/Mirage
Mitsubishi Lancer

4G17
The4G17 displaces 1.3 L (1343 cc). It is a SOHC 12-valve engine. Bore is72.2 mm and stroke is 82 mm. Output is 78 PS (57 kW) at 6000 rpm and10.9 kgf·m (107 N·m) torque at 3500 rpm.

4G18
TheSOHC 4G18 displaces 1.6 L (1584 cc) with a bore and stroke of 76.0 mm x87.3 mm. It is a 4-valve per cylinder engine. Output is 105 PS net at6000 rpm (Middle East specifications) , 122 ps gross (Gulf Countriesspecification), 96 PS net with 151 NM (European specifications).

WAJA

Zotye2008 [RS6400]


Mitsubishi Freeca

Fifth Generation (Lancer )
Applications:
Mitsubishi Lancer
Mitsubishi Kuda
Proton Waja
Zotye 2008

4G19
TheDOHC MIVEC 4G19 displaces 1.3 L, featuring 4-valves per cylinder thatproduces 66 kW (90 PS) at 5600 rpm and 121 N·m of torque at 4250 rpm.It was introduced in 2002, powering the new Mitsubishi Colt.

Applications:
Mitsubishi Colt

jjj9930

6A10
Displacement — 1597 cc
Bore — 73.0 mm
Stroke — 63.6 mm
DOHC
Engine type — V type 6 cylinder DOHC 24 valve
Compression ratio — 10.0:1
Fuel system — ECI multi
Peak power — 103 kW (140 PS) at 7000 rpm
Peak torque — 147 N·m (108 ft·lbf) at 4500 rpm

Applications:
1992–94 Mitsubishi Mirage
1992–98 Mitsubishi Lancer
6A11

Displacement — 1829 cc
Bore — 75.0 mm
Stroke — 69.0 mm
SOHC
Engine type — V type 6 cylinder SOHC 24 valve
Compression ratio — 9.5:1
Fuel system — ECI multi
Peak power — 100 kW (135 PS) at 6000 rpm
Peak torque — 167 N·m (123 ft·lbf) at 4500 rpm

Applications:
1992–96 Mitsubishi Galant / Eterna / Emeraude
1995–98 Mitsubishi Mirage

6A12
Displacement — 1998 cc
Bore — 78.4 mm
Stroke — 69.0 mm
SOHC
Engine type — V type 6 cylinder SOHC 24 valve
Compression ratio — 9.5:1, 20.0:1
Fuel system — ECI multi
Peak power — 107–110 kW (145–150 PS) at 6000–6750 rpm
Peak torque — 179–181 N·m (132–134 ft·lbf) at 4000–4500 rpm

Applications:
1992–96 Mitsubishi Galant / Eterna / Emeraude
1992–94 Mitsubishi Diamante
DOHC & sports ECU
Engine type — V type 6 cylinder DOHC 24 valve
Compression ratio — 10.0:1
Fuel system — ECI multi
Peak power (1994-1996) — 127 kW (172 PS) at 7000 rpm
Peak power (1997-2002) — 132 kW (180 PS) at 7000 rpm
Peak torque — 191 N·m (141 ft·lbf) at 4000 rpm

Mitsubishi FTO

Proton Perdana/Proton Perdana V6

Proton Waja Chancellor

Applications:
1994–2002 Mitsubishi FTO
1992–96 Mitsubishi Galant / Eterna / Emeraude
1999-Present Proton Perdana
2005-Present Proton Waja Chancellor

MIVEC
Engine type — V type 6 cylinder DOHC 24 valve MIVEC
Compression ratio — 10.0:1
Fuel system — ECI multi
Peak power — 147 kW (200 PS) at 7500 rpm
Peak torque — 200.4 N·m (147 ft·lbf) at 6500 rpm

Applications:
1994–2002 Mitsubishi FTO
1993–1995 Mitsubishi Galant
1999–2002 Mitsubishi Galant
DOHC twin turbo
Engine type — V type 6 cylinder DOHC 24 valve
Compression ratio — 8.5:1
Fuel system — ECI multi
Peak power — 177 kW (240 PS) at 6000 rpm
Peak torque — 309 N·m (228 ft·lbf) at 4000 rpm

Pentti Airikkala at the wheel of a
Mitsubishi Galant VR-4 in 1989,
on his way to victory in the RAC Rally with
co-driver Ronan McNamee.

Mitsubishi Emeraude

Applications:
1992–96 Mitsubishi Galant VR-44G63
1992–96 Mitsubishi Eterna XX-4/GT

6A13
Displacement — 2498 cc
Bore — 81.0 mm
Stroke — 80.8 mm
SOHC
European and New Zealand Spec
Engine type — V type 6 cylinder SOHC 24 valve
Compression ratio — 9.5:1
Fuel system — ECI multi
Peak power — 120 kW (163 PS) at 5750 rpm
Peak torque — 223 N·m (164 ft·lbf) at 4500 rpm

Mitsubishi Diamante

Applications:
1996–2003 Mitsubishi Galant
2002 Mitsubishi Diamante
Japanese Spec
Engine type — V type 6 cylinder SOHC 24 valve
Compression ratio — 9.0:1
Fuel system — ECI multi
Peak power — 129 kW (175 PS) at 5750 rpm
Peak torque — 230 N·m (170 ft·lbf) at 4500 rpm

Applications:
1996–1998 Mitsubishi Legnum
DOHC twin turbo
Engine type — V type 6 cylinder DOHC 24 valve
Compression ratio — 8.5:1
Fuel system — ECI multi
Peak power — 206 kW (280 PS) at 5500 rpm
Peak torque — 363 N·m (268 ft·lbf) at 4000 rpm

Applications:
1996–2003 Mitsubishi Galant/Legnum VR-4

jjj9930

（资料库）

虽然资料不多，但是收集到很辛苦，希望对大家有所帮助，对自己的爱车更加了解！

RPM
每分钟转速，英文RPM，全写是Revolution(s) Per Minute，是转动性物体在转动速度上的一种衡量单位，所指的是一个物体在一分钟内的旋转圈数，一圈即是指一次的绕周转动，若以西方数学上的角度单位来衡量即是转动了360度。
经常用RPM来做为转速单位的有马达、引擎、碟机（如：光驱、硬盘等），倘若某一马达的说明书显示它具有3,600RPM的转速，表示该马达每分钟可以转3,600圈，也就是每秒钟约转60圈。此外若引擎的说明书写着转速上限为4,500RPM，如此一旦使引擎转速突破此上限，就会被称为“超转”，超转具有危险性，轻则引擎温度升高、损坏引擎，重则与引擎关连的相关系统都一并故障，甚至可能危害到相关人员（如汽车引擎超转，有可能危及驾驶与乘客）。

值得注意的是，RPM以分钟作为时间基准单位，但近年来精密型转动、精密型转速的马达愈来愈多，以分钟为单位是早期技术尚不够进步，每秒转动的圈数尚不稳定时（如：这一秒转590圈，下一秒转611圈），因此才以分钟为量测基准单位，如今逐渐的也开始有以每秒为单位的需要，特别是有精密控制旋转圈数需求的马达上。

单位转换
- RPM 的直接意思对换为 rpm 、 RPM 或 rev/min （转圈每分钟）等
-“rev”不是正式单位，故又会略为 min-1 （每分钟）
-SI 单位为 rad s-1 （弧度每秒）
-1 rev/min = 2π rad / 60 s = 0.1047... rad s-1

kw
瓦特（符号：W）是国际单位制的功率单位。瓦特的定义是1焦耳/秒（1 J/s），即每秒钟转换，使用或耗散的（以焦耳为量度的）能量的速率。在电学单位制中，是1伏特·安培（1 V·A）。日常生活中更常用千瓦作为单位，1千瓦=1000瓦特，又可写作为“瓩”。


瓦特由对蒸汽机发展做出重大贡献的英国科学家詹姆斯·瓦特的名字命名。这一单位名称首先在1889年被英国科学促进协会（the British Association for the Advancement of Science）第2次会议采用。1960年，国际计量大会（Conférence Générale des Poids et Mesures）第11次会议采用瓦特为国际单位制中功率的单位。
人们常用功率单位乘以时间单位来表示能量。例如，1千瓦·时就是一个功率为1千瓦的耗能设备在1小时内所消耗的能量，等于3.6 百万焦耳。

马力horsepower（hp）
马力（简称匹；英语：horsepower，hp）是一个古老的功率单位。现时除了汽车工业提及内燃机的功率、空调的制冷效能以外，平时已甚少机会使用马力这个单位，而会使用标准的国际功率单位瓦特。

目前最常见的定义为：
1 hp = 745.69987158227022 W
这个单位是由蒸汽机发明人詹姆斯·瓦特发明，用以表示他的蒸汽机相对于马匹拉力的功率，并被定义为“一匹能拉动 33,000 磅并以每分钟 1 英尺走动的马所作的功率”，也就是等于33,000 ft·lb·min-1

PS
This unit (German: Pferdestärke = horse strength)is no longer a statutory unit, but is still commonly used in Europe,South America and Japan, especially by the automotive and motorcycleindustry. It was adopted throughout continental Europe withdesignations equivalent to the English "horsepower",but mathematically different from the British unit. It is defined bythe Physikalisch-Technische Bundesanstalt (PTB)[7] in Braunschweig asexactly:
1 PS = 75 kilopond-meters per second
(75 kp·m/s)×(9.80665 N/kp) = 735.49875 N·m/s ≈ 735.5 N·m/s ≈ 735.5 W ≈ 0.7355 kW ≈ 0.98632 hp (SAE)
ThePS was adopted by the Deutsches Institut für Normung (DIN) and then bythe automotive industry throughout most of Europe, under varying names.
(请版主见谅，此资料无中文版本)

DOHC
顶置凸轮轴（英文：Overhead camshaft，简称OHC）是一种现今流行的汽车发动机气门机构。在这种结构中，凸轮轴被放置在汽缸盖内，燃烧室之上，直接驱动摇臂、气门，不必通过较长的推杆。与气门数相同的推杆式发动机（即顶置气门结构）相比，顶置凸轮轴结构中需要往复运动的部件要少得多，因此大大简化了配气结构，显著减轻了发动机重量，同时也提高了传动效率、降低了工作噪音。

尽管顶置凸轮轴使发动机的结构更加复杂，但是它带来的更出色的引擎综合表现（特别是平顺性的显著提高）以及更紧凑的发动机结构，使发动机制造商很快在产品中将广泛应用这一设计。顶置凸轮轴与顶置气门结构的驱动方式并不一定不同。动力可以通过正时皮带、链条甚至齿轮组传递到顶置的凸轮轴上。
此外，顶置凸轮轴结构也使采用这一设计的发动机达到比采用顶置气门结构或整体式凸轮轴结构的发动机更高的转速。
如今，许多顶置凸轮轴发动机都采用了多气门结构或可变气门正时结构以提升发动机的工作效率和动力表现。
通常按照配气结构内包含的凸轮轴数目，顶置凸轮轴可分为以下两种形式：

单顶置凸轮轴（Single overhead camshaft, SOHC）
双顶置凸轮轴（Double overhead camshafts, DOHC）


一个对半剖开的汽缸盖，内有两条顶置凸轮轴。
两条凸轮轴下部各有一对气门。


单顶置凸轮轴（SOHC）
单顶置凸轮轴是一种在汽缸盖内只设置一条凸轮轴的设计。采用这一设计的直列汽缸发动机只需一条安放在汽缸盖上方的凸轮轴，而V形汽缸发动机则需要两条凸轮轴，分别安放在一侧汽缸组之上。


单顶置凸轮轴设计中，需要往复运动的部件及其总质量较同等条件下的推杆式发动机显著减少。因此单顶置凸轮轴能提高发动机转速，从而在输出扭矩相同的情况下提高发动机的功率输出。在这一设计中，凸轮轴能够直接或通过摇臂控制气门开闭，而不需像顶置气门的推杆式发动机一样，需要通过挺杆、较长的推杆以及摇臂将发动机组内凸轮轴上凸轮的运动传递到汽缸盖内的气门上。

相比于推杆式结构，单顶置凸轮轴设计能使发动机结构（主要是配气结构）更加紧凑。这一优势在同时采用多气门设计（即一个汽缸有两个以上的气门）时特别显著。不过有时为了适应发动机设计的特定要求，在使用单顶置凸轮轴设计的同时也需要采用一些附加部件。希尔曼顽童（Hillman Imp）的4缸8气门发动机便是采用气门间隙调节垫片及活塞阀进行调节的单顶置凸轮轴发动机的典型。希尔曼顽童是一款1960年代初设计制造的小型双门轿车。其后置合金发动机是由考文垂顶点（Coventry Climax）系列赛车发动机改进而来的。在这台发动机中，进气与排气气门被安放在发动机体的同一侧，因而无需采用交叉气流汽缸盖（crossflow cylinder head）的设计，同时有利于火花塞的工作。

不过单顶置凸轮轴也有其缺点。由于进气门和排气门在进气道中位置不同，气门开闭时间的精确性会受到一定影响。
在1980年代早期，丰田（Toyota）和大众汽车（Volkswagen）也曾在单顶置凸轮轴的每缸两气门发动机中使用过直接驱动、平行气门的结构以使体积进一步紧凑。

丰田采用的是液压挺杆，而大众汽车采用的是桶状挺杆，同时还配备了气门间隙调节垫片以精确控制气门开闭时间。在单顶置凸轮轴发动机的所有气门排列形式中，这种设计可能是最为紧凑和简单的。


1987年款本田 CRX Si.（Honda CRX Si.）的单顶置凸轮轴汽缸盖

双顶置凸轮轴（DOHC）
双顶置凸轮轴（dual overhead camshaft, DOHC，又称double overhead cam, dual overhead cam），或简称“双凸轮轴”（twin cam）是一种在汽缸盖内配备两条凸轮轴的气门排列形式。两条凸轮轴分别控制进气门和排气门。根据引擎的构造不同（主要是汽缸排列形式的不同），一台一般的双顶置凸轮轴汽车发动机可最多拥有两条到四条不等的凸轮轴。

双顶置凸轮轴结构的发动机并不一定有两个以上的进气门和排气门，但是如果多气门发动机的气门需要被直接驱动（虽然一般都通过挺杆驱动），那么双顶置凸轮轴是必不可少的。并非所有的双顶置凸轮轴都是多气门的——在多气门技术普及之前，两气门发动机上也经常配备两条凸轮轴。不过在当今，双顶置凸轮轴已经与多气门技术划上了等号，因为在几乎所有的双顶置凸轮轴发动机中，每个汽缸都有三个到五个气门。



铃木GS550（Suzuki GS550）的双凸轮轴和驱动链轮的俯视图


历史
最早一批采用双顶置凸轮轴设计的发动机分别是由菲亚特（Fiat，于1912年）、标致（Peugeot）大奖赛（于1913年）、阿尔法·罗密欧（AlfaRomeo）大奖赛（于1914年）设计制造的。其中后两者还采用了每缸四气门的设计。在后来的阿尔法·罗密欧6C（1925年）、玛莎拉蒂蒂波26（Maserati Tipo 26，1926年）、布加迪51型（Bugatti Type51，1931年）以及早期的奥迪（Audi）等车上也采用了这一技术。此外，早期采用每缸两气门技术的法拉利（Ferrari）大多使用了双顶置凸轮轴。

jjj9930

可变气门正时(Variable valve timing)

可变气门正时，或 VVT，是一种用于汽车活塞式发动机中的技术。VVT技术可以调节发动机进气排气系统的升程、重叠时间与正时（其中一部分或者全部）。

活塞式发动机通常通过提升阀来进气与排气。提升阀直接或间接地被凸轮轴上的凸轮驱动。在每个进气排气循环中凸轮驱动气门打开（升程）一定时间（重叠时间）。

气门打开和关闭的正时也十分重要。曲轴通过正时皮带，齿轮或链条来驱动凸轮轴。
凸轮轴上凸轮的轮廓与位置通常是为特定的发动机转速而优化的，通常这会降低发动机在低转速情况下的扭矩和高转速情况下的功率。VVT技术能够使其根据发动机工况进行改变，提高了发动机的效率与动力。

在高转速下，发动机需要更多的空气。但是，进气气门可能在所需空气完全进入前关闭，降低了性能。
另一方面，如果凸轮持续令气门打开较长时间，像赛车中的情况，在较低转速下便会出现问题。持续打开的气门会导致燃料未经燃烧便排出发动机。这样会降低发动机的性能并增加污染。所以，比赛用发动机怠速不能过低；而民用车中2000 rpm左右的怠速是不常见的。

环境与燃油经济性法规的压力使车商选用VVT技术作为解决方案。简单的VVT系统可以提前或延后进气排气气门的正时。其他的像本田的VTEC技术可在不同发动机转速下在两组凸轮中切换。更先进的技术例如本田的I-VTEC技术可以持续的改变气门的升程与正时。


本田K20Z3发动机中的i-VTEC系统。

各个车厂的名称
-VTEC、i-VTEC、VTEC-E - 本田技研工业的名称。
-MIVEC - 三菱汽车的统称。
-AVCS - 富士重工业的名称。Active Valve Control System的简称。
-NVCS、CVTC、eVTC、NEO VVL、VVEL 、VEL- 日产汽车的名称。
-VVT-i、VVTL-i、VVT-iE、VALVEMATIC - 丰田汽车的名称。
-VVT、VC - 铃木公司的名称。前者用在汽车上、后者用于摩托车。
-DVVT - 大发汽车的名称。
-S-VT - 马自达的名称。
-VarioCam、VarioCam Plus - 保时捷的名称。
-VANOS、Valvetronic - BMW的名称。




凸轮轴
凸轮轴是活塞发动机里的一个部件。它的作用是控制气门的开启和闭合动作。虽然在四冲程发动机里凸轮轴的转速是曲轴的一半（在二冲程发动机中凸轮轴的转速与曲轴相同），不过通常它的转速依然很高，而且需要承受很大的扭矩，因此设计中对凸轮轴在强度和支撑方面的要求很高，其材质一般是特种铸铁，偶尔也有采用锻件的。由于气门运动规律关系到一台发动机的动力和运转特性，因此凸轮轴设计在发动机的设计过程中占据着十分重要的地位。


大众汽车制造的1.8升四缸8气门发动机中的凸轮轴。

构造
凸轮轴的主体是一根与汽缸组长度相同的圆柱形棒体。上面套有若干个凸轮，用于驱动气门。凸轮轴的一端是轴承支撑点，另一端与驱动轮相连接。
凸轮的侧面呈鸡蛋形。其设计的目的在于保证汽缸充分的进气和排气，具体来说就是在尽可能短的时间内完成气门的开、闭动作。另外考虑到发动机的耐久性和运转的平顺性，气门也不能因开闭动作中的加减速过程产生过多过大的冲击，否则就会造成气门的严重磨损、噪声增加或是其它严重后果。因此，凸轮和发动机的功率、扭矩输出以及运转的平顺性有很直接的关系。
一般来说直列式发动机中，一个凸轮都对应一个气门，V型发动机或水平对置式发动机则是每两个气门共用一个凸轮。而转子发动机和无阀配气发动机由于其特殊的结构，并不需要凸轮。


位置
在以前很长的一段时间里，底置式凸轮轴在内燃机中最为常见。通常这样的发动机中，气门位于发动机的顶部，即所谓的OHV（OverHead Valve，顶置气门）式发动机。此时通常凸轮轴位于曲轴箱的侧面，通过配气机构（如挺杆、推杆、摇臂等）对气门进行控制。因此底置式凸轮轴一般也叫侧置式凸轮轴。由于在这样的发动机中凸轮轴距离气门较远，而且每个气缸通常只有两个气门，因此转速通常较慢，平顺性不佳，输出功率也比较低。不过这种结构的发动机输出扭矩和低速性能比较出色，结构也比较简单，易于维修。
现在大多数量产车的发动机配备的是顶置式凸轮轴。顶置式凸轮轴结构使凸轮轴更加接近气门，减少了底置式凸轮轴由于凸轮轴和气门之间较大的距离而造成的往返动能的浪费。顶置式凸轮轴的发动机由于气门开闭动作比较迅速，因而转速更高，运行的平稳度也比较好。较早出现的顶置式凸轮轴结构的发动机是SOHC（Single OverHead Cam ，顶置单凸轮轴）式发动机。这种发动机在顶部只安装了一根凸轮轴，因此一般每个汽缸只有两到三个气门（进气一到两个，排气一个），高速性能受到了限制。而技术更新一些的则是DOHC式（Double OverHead Cam，顶置双凸轮轴）发动机，这种发动机由于配备了两根凸轮轴，每个汽缸可以安装四到五个气门（进气二到三个，排气二个），高速性能得到了显著的提升，不过与此同时低速性能会受到一定的影响，结构也会变得复杂，不易维修。

传动方式
底置式凸轮轴通常采用星形齿轮组（即所谓的“控制轮”），辊子链或齿条与曲轴相连。为了控制噪声，直径较大的凸轮轴端传动轮通常由塑料或者轻金属制造，而相对直径较小的曲轴端传动轮则大多采用钢材。
链条连接也比较多见。这种方式在底置式和顶置式凸轮轴上都可以看到。为了减小噪声（一般是链条在运动中产生的“振摆噪声”），通常还会附带一个液压压紧装置和塑料材质的导轨。
顶置式凸轮轴结构中比较多见的是用一个塑料齿条链连接。这个齿条链位于发动机机油腔外，附带有钢质的嵌入部件，通过一个可调的辊子帮助张紧。
还有一种结构由于动力在传输过程中损耗过大且过于复杂，现在已经比较少见。这种结构通过一个偏心连杆、星形齿轮组或带中间轴的锥形齿轮组来连接顶置式凸轮轴与曲轴。


Components of a typical, four stroke cycle, DOHC piston engine.
四冲程循环活塞发动机的典型构成。
(E) 排气凸轮轴
(I)进气凸轮轴
(S)火花塞
(V)气门
(P)活塞
(R) 连杆
(C)曲轴
(W)水冷的水套



Double overhead cams control the opening and closing of a cylinder's valves.

１．Intake
２．Compression
３．Ignition
４．Exhaust

ghseng

我的车是4G18的引擎！

josh79t

good good good.... can give honda info....

ess106

既有娱乐版块又有这样的知识版块，我非常喜欢这样的论坛。

emory

A humble 6A12 DOHC is fitted in my car