Board logo

標題: 新砌一部主機,又死機又裝唔到WINDOWS [打印本頁]

作者: ryan725    時間: 2011-6-27 11:24 PM     標題: 新砌一部主機,又死機又裝唔到WINDOWS

平時幫日砌機,一年幾部,咁多年都無問題
但唔知點解今次奶野,
部機的配置:AMDX6(1090T),兩條KINGSTON-4GB-1333,板係技嘉870USB3.0戈個,顯卡係HIS的6870,硬盤係WB500GB藍版
全部野正常插好
第一次開機無問題,跟住重啟之後就長響
咁我覺得係條RAM問題,SO重新插過第二度又無問題
點知去到裝WINDOW度,我裝的是WINDOW XP
裝左五次以上都係死機,或者藍畫面,但間中都仲有長響後死機
換左自己個HARDDISK都係唔得
咁我就換左另一條自己用開的RAM黎裝WINDOW,
只係死左一次機,之後就裝到仲用得好正常添
咁我再插返戈兩條RAM去自己部機又正常喎
到晚上我就換返新戈兩條RAM落部新機度裝WIN7(都係老番,不過係平時自己裝開戈隻)
又無死過機咁裝好WINDOW喎,點知用用下無端端又藍畫
咁我以為都係無乜事啦,點知一UPDATE又藍畫面
究竟我部新機係咩事呢????????????
麻煩各位大哥們幫幫忙,而我又可以點做同做咩好呢???
十萬個感激
作者: cas123    時間: 2011-6-28 05:34 AM

check what is causing BSOD with->http://www.nirsoft.net/utils/blue_screen_view.html
test your ram  ->http://www.memtest.org/<- atleast 3 pass
what psu you using?

try
reset bios, update to newer one, disable item in bios that you are not using.
re-seat CPU, power connector (24pin, aux and pci-e).
remove MB and check the back for short(solder point too close/touching) then test system in open bench(not in case).
if item are new return/exchange for different and test, start with MB.
作者: cykwok    時間: 2011-6-29 10:33 PM

1)CPU 有冇過熱 ?
2)CPU & RAM 有冇超頻 ? (Check BIOS setting)
3)如有新版本 BIOS 試 Update
4)Scan RAM error
http://www.memtest.org/
作者: poorbug    時間: 2011-7-1 04:22 PM

check MB yet?
not enough power? (6870 is pretty hungry on Watts)
作者: HAU_TO    時間: 2011-7-3 07:14 PM

主板技嘉870USB3問題
主板RAM地址問題




歡迎光臨 公仔箱論壇 (http://5.39.217.77:8898/) Powered by Discuz! 7.0.0